DC-DC Step Up Down Module XL6009 Adjustable Module QS-0524CBDE-15W

SKU: 1941714

1.14 1.14 Piece 1.1400000000000001 USD

¥ 8.00

Option not available

This combination does not exist.

Add to Cart

Brand: QSKJ

Model:  QS-0524CBDE-15W

Features:

  • The new original XLSEMI chip, eliminate fake, disassemble chip.

  • Imported SMD electrolytic capacitors, not accompanied by homemade capacitance.

  • Up to 400Khz operating frequency, and LC filter circuit, output ripple is very low.

  • Import TDK inductors, the heat and noise to a minimum.

  • Input and output three MLCC Multilayer ceramic capacitors, interference enhance stability.

  • PCB use kb of A grade sheet material, to prevent cardboard, garbage plate.

  • Built-in MOSFET, the LM2577 built-triode say goodbye, can reach 94% efficiency.

  • Increased enable the port, you can control whether the boost circuit.

  • Dimensions: 49 (L) * 23.4 (W) * 11.4 (H) mm (excluding potentiometer)

Parameters:

  • Module Properties: non-isolated step-up module (BOOST)

  • Input voltage: 5-32V

  • Output voltage: (1) continuously adjustable (5-50V)

  • Output Current: 2.5A (MAX)

  • Input Current: 4A (MAX)

  • Output power: natural cooling 15W, plus heat sink 25W (MAX) real power

  • Maximum output power = input voltage conversion efficiency * 4A *conversion efficiency

  • Full load temperature rise: 45 C

  • Operating frequency: 400khz

  • Load current: 5V turn 12V 15mA, 8.4V turn 12V 7mA, 12V switch 24V 9mA, 12V switch 36V 18mA, 24V switch 48V 9mA, 24V switch 36V 6mA.

  • Load regulation: ± 0.5%

  • Voltage regulation: ± 0.5%

  • Dynamic response speed: 5% 200uS

  • Enable Control Port: Yes, high 1.4V-VIN (ON), low 0-0.8V (OFF), the default high

  • Short circuit protection: None (Please install fuse or protection circuit input)

  • Input reverse polarity protection: None, please with our reverse protection diode board or in the input series.

  • Installation: You can screw (Fixing holes 3 mm), 2 fixing holes

  • Operating temperature: Industrial grade (-40 C to + 85 C) (ambient temperature exceeds 40 degrees, lower power use, or to enhance heat dissipation)

  • Conversion efficiency: the efficiency of the measured voltage and current commonly used (hereinafter, for reference only)

           A=Input voltage. B=Input Current. C=Output voltage. D=Output Current. E=conversion efficiency