Brand: QSKJ
Model: QS-1212CBA-150W
This Module is CE Certificate. Certificate will be provided after orders.
Size:6-32V to 0.8-28V 150W (Case)
Size: 83 (L) x 45 (W) x 19 (H) mm (excluding input and output terminals)
Size: 101 (L) x 45 (W) x 19 (H) mm (including the input and output terminals)
Feature:
- Module Properties: non-isolated buck-boost module (high efficiency)
- Rectification: synchronous rectification
- Input voltage :DC 6-32V (Rated Power, input voltage equal to 9V; if input 6v, output about 90W)
- Lowest dropout: 0V (seamless automatic switching buck-boost, no minimum pressure requirements)
- Output voltage :DC 0.8-28V (adjustable)
- Output Current: 15A (MAX)
- Output Power: 150W (MAX) (eg: output 12V 13A)
- Conversion efficiency: Up to 97% (the higher the output voltage, the higher the efficiency, the smaller the pressure the higher the efficiency)
- Soft-start time: 500mS
- Remote control port: Yes, ON/OFF, (Connect 0V, closed), (Connect 5V or Vacant, work).
- Output ripple: 1% (MAX), 20M-bandwidth
- Operating Temperature: Industrial (-40°c to +85°c) (if ambient temperature exceeds 40 °c, please lower power use, or to enhance heat dissipation)
- Full load temperature rise: 40°c
- Load regulation:± 1%
- Voltage regulation: ± 0.5%
- Dynamic response speed: 5% 200uS
- Short circuit protection: Yes, output current limiting (current limit of about 17A)
- Input Reverse Polarity Protection: Yes
- Input over-voltage protection: Yes, over-voltage protection is 33V, the maximum input voltage can not exceed 36V.
- Indicator: Yes, working properly (Green), not working or protection (Red)
- Connection: Removable terminal, The eight input and output terminals,Maximum current per port 6A, Please use multiple ports in parallel when large current.
You may also like
KA2284 Power level Battery Indicator Module
$ 0.83 $ 0.83
MB102 Breadboard Power Supply Module 3.3V/5V for Arduino
$ 0.83 $ 0.83
